Publisher Tool flashing References
Xiaomi Mi Flash tool is a tool developed by Xiaomi Inc which allows the user to Flash Firmware on their Xiaomi devices. You can Upgrade or Downgrade device Firmware. Or in the case of boot loop, you can flash Stock ROMs directly using this Application.
Mi Flash Tool All Version List (Previous Versions)
| Xiaomi Flash Tool Version | Download Link |
|---|---|
| Mi Flash Tool v4.5.9 |
|
| Mi Flash Tool v5.6.1 |
|
| Mi Flash Tool v5.7.31 | |
| Mi Flash Tool vv5.10.28 | |
| Mi Flash Tool v6.4.1 | |
| Mi Flash Tool v6.8.30 | |
| Mi Flash Tool v6.12.22 |
procedures Flashhing step by step
This application now supports both 32 Bit & 64 Bit Version Windows OS.
1. Download Mi Flash tool from above download links first. Open the folder where you have placed or downloaded this tool.
Now, Extract the Downloaded zip file in your Windows PC. Make sure that you have uninstalled any Previous version of Mi Flash Tool.
2. Run MiFlashSetup.msi file from extracted folder this will start installation on your windows.
3. Maybe depends on your Windows Setting, You will get a Security Warning. Don’t worry about it! Just press Run button to Continue.
4. On the first screen Choose Next option.
5. On the next screen, Installer will automatically choose Installation Folder. Just press Next button to continue the installation process.
5. Choose Next to Confirm installation.
6. Please wait until it completes installation of this tool on your Windows OS. You will see the installation is completed successfully. Press Close button to exit.
That’s it! We have successfully installed Xiaomi Mi Flash tool on your Windows PC. Now, you are ready to flash Xiaomi Stock Firmware/ROMs on your phones.
How To Use Xiaomi Mi Flash Tool?
Installing Fastboot ROM Using this tool is quite simple. Just follow some the below steps to make it happen. Make sure that you have installed Mi Flash tool on your Windows PC.
1. Download Stock Firmware (Fastboot ROM) of your Xiaomi device from that page.
2. Extract the downloaded firmware in your computer.
3. Also, Make sure that you have installed Xiaomi USB Driver on your PC. If you didn’t then please install them from that link.
4. Now, Boot your device into Fastboot mode. To do this Switch off your Xiaomi Phone. Now, Press Power On button + Volume Down button for few seconds until it boot into Fastboot Mode.
5. After booting into Fastboot Mode you will see the following screen with Mi Bunny.
6. Connect your device to the computer using Micro USB Cable. Windows will automatically installed the required USB Drivers.
7. Now, Open Xiaomi Mi Flash tool from the Desktop or Start Menu.
8. From the screen Select the unzipped Fastboot ROM folder. Use the “Select” button to locate the folder of that Stock Firmware of your device.
9. Press the “Refresh” button to check whether your device is connected or not. If it shows the device then you are ready to go further.
10. Now, From the bottom choose one any option from them. To know there function refers above. I have explained the function of each of this command. Press the Flash button to Flash MIUI Fastboot ROM on your Xiaomi Smartphone.
11. When the flashing process completes you will get Success message on Flash tool screen.
So, This was the simplest Guide to Use Xiaomi Mi Flash tool to flash Fastboot ROMs on MIUI Devices running on Snapdragon processor. You can check out Video guide for more info & can follow instruction stepwise.
0 Comments